What Type Of Drainage Pipe To Use Under Driveway

This type of drain is long and narrow and should run the entire width of the driveway.

What type of drainage pipe to use under driveway. French drains are used to remove excess water from an area. You might want to consider something like extra heavy cast iron for under the drive if you have limited cover over the pipe. These drains can be made from either gravel filled trenches or pvc piping with holes drilled in the pipe.

A trench drain can be installed where the driveway meets the garage. The type of channel drain suitable for a driveway comes with a b125 loading class meaning the channel can hold a weight of up to 12 5 tonnes. A trench drain must be covered by a grate to keep it free of debris that could clog the pipe.

The channel comes with a grating which is metal and sits on the surface to allow water to run off into the channel underneath and be distributed to a suitable collection point. I suggest a plastic pipe. Another type of plastic pipe pvc also has its uses.

Use pvc pipe to protect other supply lines that you must run under the driveway as well. Decorative grates are available for trench drains that can be used as a unique design element. A true french drain is made with gravel but with gravel driveways pvc piping is recommended.

6 corrugated will flow a relative small volume of water. In most cases corrugated plastic pipes will be a good fit for the job. If you re installing a driveway culvert check with your local building codes administrator.

It is ideal for low water flow or when the water needs to be carried over great distances as is the case in irrigation. Make the trench at least 12 inches wide and 15. The pvc piping only needs to be 4 to 6 inches in diameter for draining purposes.